Article

Installing a basin tap yourself: tools, flexible hoses and mistakes to avoid

Replace your basin tap yourself in six steps and avoid the most common mistakes.

22Nov 2026
Installing a basin tap yourself: tools, flexible hoses and mistakes to avoid

Replacing a basin tap is one of the most enjoyable bathroom jobs you can do yourself. With the right preparation, it is a manageable job that instantly gives your bathroom a fresh look.

To install a single-lever basin tap, turn off the water, remove the old tap, connect the flexible hoses to the new tap, secure it through the tap hole and connect the hoses to the shut-off valves. The most common mistakes are forgetting to turn off the water and overtightening the connections.

Before you buy the new tap

Tap hole

Check how many tap holes your basin has. Single-lever basin taps such as the Aquanello Eterna fit a single tap hole. 

Tap height

A basin with a tap hole needs a standard tap; a countertop vessel basin needs a tall tap. Read how to match the tap height to the basin depth.

What do you need?

A bucket and a towel, an adjustable spanner and a torch to see under the basin. Also check that your shut-off valves work and that the new tap’s flexible hoses can easily reach them.

Step by step

  1. Turn off the water at the shut-off valves under the basin and open the old tap to release the pressure.

  2. Disconnect and remove the old tap. Keep the bucket handy to catch any remaining water.

  3. Screw the flexible hoses into the new tap by hand before installing it. This is much easier than doing it under the basin.

  4. Insert the tap through the tap hole and secure it from below with the mounting kit, making sure it is straight.

  5. Connect the hoses to the shut-off valves: hot is usually on the left, cold on the right.

  6. Slowly turn the water back on and check every connection for leaks.

What if the old tap is stuck?

Old fixing nuts can be stiff due to limescale. Work carefully with the spanner and support the tap from above so you do not damage the basin. If a nut will not come loose or a shut-off valve will not close, stop and call a plumber.

Mistakes to avoid

Overtightening

Tighten the connections securely, but do not force them: too much pressure can damage the seals.

Mixing up hot and cold

Check which shut-off valve supplies hot water before connecting the hoses. Hot is usually on the left, cold on the right.

Twisting the hoses

Keep them straight, without kinks.

Forgetting to flush the tap

Let the water run briefly before fitting the aerator so that no debris gets trapped.

For more tips on preventing leaks, read our sealing tips for long-lasting bathroom taps.

A tap that is easy to install

The Aquanello Eterna single-lever basin mixer tap is designed for a single tap hole and features a ceramic disc cartridge and a 5-year warranty. For a countertop vessel basin, choose the tall Eterna basin mixer tap. Both are available in stainless steel, matt black, brushed gold and brushed copper. Explore the complete Aquanello Eterna range.

Do not forget the waste

A waste is not included with the Eterna basin taps. The matching Aquanello Eterna pop-up basin waste is available in the same finishes.

After installation

Check the connections again after a day and look for any drips under the basin. Wipe the new tap with a soft cloth and a mild cleaning product to prevent limescale buildup.

A good start makes all the difference

With a little preparation and care, anyone can install a basin tap. If you are unsure about your shut-off valves or pipes, call a plumber. For everything else to check when choosing a bathroom tap, read our bathroom tap buying guide.

View the Aquanello Eterna basin mixer taps

FAQ

Can I install a basin tap myself?

Yes. With a wrench, some preparation and working shut-off valves, it's a manageable job.

Which side is hot on a basin tap?

Hot is usually on the left, cold on the right. Check your shut-off valves before connecting the tap.

How tight should I tighten the connections?

Firmly, but don't force them. Overtightening can damage the seals.

How many tap holes does the Eterna basin mixer tap need?

One. Both the standard and tall Eterna basin mixer taps fit a single tap hole.

Is a drain included with the Eterna basin mixer tap?

No. The Aquanello Eterna pop-up basin waste is sold separately.

install washbasin tapreplace washbasin tapinstall bathroom tapflexible tap hoses

Welcome to Loriano.de

Be the first to know about new arrivals, exclusive collections, offers and the latest design news.

New subscribers receive a 10 € welcome credit toward their first order.

By subscribing you agree to our privacy policy. You can unsubscribe at any time.

Loriano.de

Premium European kitchen, bathroom, lighting and tools. Beautifully curated, expertly delivered.

Loriano Deutschland GmbH

Winterhuder Weg 29/7

22085 Hamburg

Deutschland

IHK: HRB 195060

Categories

Customer Service

More information

Contact

© 2026 Loriano.de. All rights reserved.

Select your country:
Bank transferCardPayPalKlarnaApple PayGoogle PayTrustlyBillie (Pay by Invoice)Satispay